Surf web via Tmobile MDA via USB via T-Zones?

[imported_ghengis]

Okay, I have got the following info from somewhere which will show you a step-by-step of how to access the internet on T-Mobile on your MDA with just T-Zones access. It can be done, and I will give you the steps. I just figured it out myself.

1. Open up your keyboard and get out your stylus because it will make it easier
2. Start menu --> Settings
3. Go to 'Connections' tab
4. Then click on Connections app
5. Select 'Set up my proxy server'
6. Select the 'General' tab
7. On the general tab, name it "WAP" (or anything, really, that's just what I used) -- if you haven't messed with this before, it will say "My Work Network"
8. Select the 'Modem' tab
9. Click on New...
10. Name the connection "Tzones" (again, that's what I used)
11. Under modem, select 'Cellular Line (GPRS)'
12. Click Next
13. Under access point name, type "wap.voicestream.com"
14. Click Next
15. Leave "User name", "Password", and "Domain" blank (not a space, but blank)
16. Click on Advanced...
17. On the 'TCP/IP' tab, ensure "Use server-assigned IP address" is checked and that nothing else is checked or filled-in
18. On the 'Servers' tab, ensure "Use server-assigned addresses" is checked and that nothing else is checked or filled-in
19. Click "ok" in the top right corner (or press the OK button next to your space bar)
20. Click Finish
21. Select the 'VPN' tab and make sure there is nothing here
22. Select the 'Proxy Settings' tab
23. Check the box "This network connects to the Internet"
24. Then you can check the box that says "This network uses a proxy server to connect to the Internet"
25. Then type into the Proxy server box: 216.155.165.50:8080
26. Click on Advanced...
27. Click on "HTTP"
28. The server should read 216.155.165.50
29. Change the port number to 8080
30. Leave "User name", "Password", and "Domain" blank (not a space, but blank)
31. Click "ok" in the top right corner (or press the OK button next to your space bar)
32. And do the "ok" thing again
33. And "ok" one more time
34. Notice 1: at the top of the screen, it should say "WAP" (or whatever name you chose in step 7)
35. Notice 2: where before it said 'Set up my proxy server' now it should read 'Edit my proxy server' -- just FYI, don't touch
36. Click on the 'Advanced' tab
37. Click on "Select Networks"
38. Under both drop-down boxes, choose "WAP" (or the name you chose in step 7) -- I'm not sure the 2nd one needs to be the same, but what the heck, it worked for me; feel free to experiment
39. Click "ok" in the top right corner (or press the OK button next to your space bar)
40. And do the "ok" thing again
41. Push the "e" on your MDA to launch Internet Explorer
42. Make sure you're not connected via the USB cable
43. Go to "Favorites" and choose one of the sites listed there and see if it works
44. If it works, congratulations! Stop here.
45. If it doesn't work, go back to step 1 or ask for help (but I'm no expert, so I think I'll leave it to others to help you)