How to flash Motorola phones
|
|
OK this is how to load PRL onto MOST Motorola phones. You need to have Motorola PST for these instructions. This is a suggesting you only how to after you have installed all the proprietary software that you aren't supposed to have. Google is your bestest friend, you can find these things out from there.
1. Open Motorola PST's Phone Programmer before connecting phone
2. Once Phone Programmer is opened, Connect Phone, wait for computer to beep like 5-10 times
3. From the File menu select Open->CDMA PRL
4. Browse to your PRL file and open it
5. Select write to phone
6. If Security Code is needed, cancel and follow instructions below
7. Reset phone
ALL DONE
To Retrieve Security code (and reset to 000000) you will also need P2k Seem (i am not responsible if you mess up your phone on this one!)
Leave Motorola PST open so phone is in correct USB mode
1. Open P2K Seem
2. For seem enter 0055
3. for bytes enter e
4. read from phone
5. in the main part you will see a 6 digit code at the top on the right column
6. put your cursor clicky clicky on the first number and punch 0 six times to write over number
7. choose save to phone
8. now your SPC/security/sublock code is 000000
If you need some more help then you can post it here ot you can google it. Have fun
|